AudioSource 2-Way Bedienungsanleitung PDF herunterladen

Congratulations on your purchase of the AudioSource

AC Series In-Ceiling Speaker System. This product is

designed to reproduce the audio portion of your

home entertainment environment with accuracy and

detail that will satisfy the most discriminating listener.

Please read this Installation Manual to ensure the

proper installation and performance of your AC Series

speakers.

Preparing for your Installation

Gather the necessary tools for your installation.

You will need the following tools:

1) A Keyhole or Drywall Saw

2) A Phillips Screwdriver

3) Masking Tape

4) A Pencil

5) A Tape Measure

6) A Stud Finder (recommended)

7) Your AC Series speakers

Placement

Plan your speaker placement carefully. Make certain

that electrical, plumbing and any other services will not

interfere within the ceiling where you plan to install your

speakers. The AC Series speakers can be mounted in

walls, but are typically used in ceilings. The speakers

should be located so that they provide even coverage

at your listening position. The distance between the

speakers should not be greater than the distance from

the speakers to the listening position (See Figure 1).

AC5C

Use a stud finder to locate the joists behind the ceiling

surface. Also, you should now check for obstructions

like cross bracing in front of and behind the desired

speaker location.

5.25” 2-Way In-Ceiling Speakers

11’

16’

20’

11.5’

Figure 1

Existing Construction

In most modern buildings ceiling joists are positioned

on 16” centers, providing a space between the joists of

approximately 14 3/8”. The specifications chart shows

the appropriate cut out sizes (p. 4). Additionally, you

should allow an extra 3/4” in all directions behind the

ceiling surface to allow room for the screw clamps that

mount the speaker to the ceiling to swing into position.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Existing Construction

Congratulations on your purchase of the AudioSource AC Series In-Ceiling Speaker System. This product is designed to reproduce the audio portion of yo

Seite 2 - Installing the Speakers

After selecting the mounting location, mark the hole to be cut out. A template is provided in the speaker box. Locate and align the template, then mar

Seite 3 - Painting the Speaker

3Tighten all four of the mounting screws in the same manner until the speaker is properly aligned and held tight to the ceiling surface.Painting the S

Seite 4 - Two Year Limited Warranty

48100.AC5CAAC5CSpecificationsWooferTweeterFrequency ResponseImpedanceSensitivityPower CapacityOuter DimensionCut Out DimensionMounting depth5.25” Poly